2S 4A BMS Li-Ion Battery Protection Board with Nickel Strip
Product Details
- Product Type: Battery Management System
- With attached Nickel Strip
- For 2 cell 18650 Li-Ion Battery
- Module Dimension: 38.5mm x 8.0mm x 1.0mm
- Package contains: 1 x 2S 4A BMS Li-Ion Battery Protection Board with Nickel Strip
₹75.00 (ex. GST)
2S 4A BMS Li-ion Battery Protection Board With Nickel Strip is an electronic system that manages a rechargeable battery by monitoring its state, calculating the data, reporting that data. It gives overcharge Protection, short circuit protection, and over-discharge protection to the battery. The term 2S 4A BMS denotes 2 series battery pack with 4A continuous discharging current. For a rechargeable battery pack BMS is a must needed device for safe operation.
Specification
- Maximum Working Current: 4A
- Continuous Discharge Current: 4A
- Charging Current: 20A(Max)
- Working Temperature: -40~50℃
- Over-charge Detect: 25±0.0025V
- Number of Cells in Series: 2S
- Compatible With: 7.2V(approx.) lithium battery
- Release Voltage: 9±0.1V
- Detect Voltage: 150mV
Based on 0 reviews
Be the first to review “2S 4A BMS Li-Ion Battery Protection Board with Nickel Strip”
Related products
-
Modules
TM1637 4-Digit 7 Segment LED Display Module for Clock
Product Details:
- Product: 4 digit 7 segment display module
- Driver IC: TM1637
- Digits: – Four
- Surface Colour: – Black
- Epoxy Colour: – Milky White
- PCB color: Blue
- Dimensions :42mm x 24mm x 12mm
- Digit Height: – 14.2mm
- LED colour: green or red (depends on availability)
- Package contains: 1 x 4 digit 7 segment LED display module for Arduino
SKU: 212 -
Modules
8×8 Dot LED Matrix Display LED Display Module
Product Specifications
- Product type: 8×8 LED matrix
- Chip or IC: MAX7219
- Voltage supply: 3.7-5.3V
- Current supply: 320mA
- Dimensions
- Display: 32mmX32mmx6
- PCB: 50mx32mm
- LED size: 5mm
- Package contains: 1 piece of 8×8 LED matrix and 1 piece of connecting wire
SKU: 206 -
Arduino
Arduino Uno Prototyping Shield with 170 Point Mini Breadboard
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The board is designed to solder both through-hole and SMD components to test them with your Arduino board. Although the SMD area is designed for 24 Pins SOIC integrated circuit and has a lot of space for TH components.
Features
- It has a standard 0.1” x 0.1” prototyping grid with big pads
- Comes with both stacking and plain header, choose whichever you want while soldering together
- An IC pattern for adding a DIP IC up to 20 pins
- Power rails down the middle and side
- A reset button and an extra use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of the shield on top, and/or use and AVR programmer
- A surface-mount chip area for up to 14 SOIC size part
- Compatible with tiny breadboards
- Every pin is brought out
- Gold plated pads
- 2 x 0.1uF ceramic capacitors on either side for extra power stability
SKU: BDA-002 -
Relays
8 Channel 5V Relay Module with Opto Coupler
Product Specifications
- Product Type: 8-Channel relay module
- Dimensions: 140 mm x 55 mm x 19.3 mm
- Weight: 120 g
- Relay colour: Blue
- PCB colour: Blue
- Maximum output of relay: AC250V 10A and Dc30V 10A
- Number of Relays: 8
- Control signal type: TTL level
- Input voltage: 5v
- Compatible with: Arduino, AVR, PIC, ARM, Raspberry Pi etc
- Package contains: 1 piece of 8 channel relay module
SKU: 432
There are no reviews yet.