This is a high power electric voltage regulator, work power up to 2000W and at 200V AC, usually can be used to adjust the voltage, light, motor speed, and temperature. In the case of access to the load, users can use it to adjust the AC voltage, adjust the range from AC50V to AC220V.
The device comes with reverse polarity protection and high current protection. It uses the Fr-4 circuit board that can bear high temperature, and 220V/25A voltage/current rating. The module is equipped with a peak observation circuit that can effectively protect the high-power thyristor, making it a longer life.
Usage
Series in the circuit of household appliances, (disconnect the household appliances WireFire or zero lines, and then connect the two lines of products) rotary potentiometer knob, you can play light and dark regulation, speed, pressure, thermostat effect.
Specification
- Working voltage: 220V AC
- Maximum power: 2000W
- Voltage regulation: 50V to 220V AC
Instructions
- charge/load should not exceed the maximum power of 2000W, otherwise, it will burn the module and electric appliances
- Use the resistive load as much as possible
- Reduce the capacitive and inductive load of much energy. It is best to leave half of them.
1M Multicolor Ribbon Cable 10 Core DuPont Rainbow Wire
SIM800L GPRS GSM Module with Wire Antenna
5pcs BC327 General Purpose PNP Transistor
SIM800L GPRS GSM Module with PCB SMA Antenna
MFRC-522 RC522 Module RF Card Reader RFID Module for Arduino
S8550 PNP general Purpose Amplifier Transistor IC (Original)
5pcs 3-Pin Relimate Male Connector 2.54mm Pitch
7420 4-Input Dual NAND Gate IC
1M 10 Wire Flat FRC Ribbon Cable – 28 AWG
TIP122 NPN Darlington Bipolar Power 5.0 A 100V Transistor 








There are no reviews yet.