This is a high power electric voltage regulator, work power up to 2000W and at 200V AC, usually can be used to adjust the voltage, light, motor speed, and temperature. In the case of access to the load, users can use it to adjust the AC voltage, adjust the range from AC50V to AC220V.
The device comes with reverse polarity protection and high current protection. It uses the Fr-4 circuit board that can bear high temperature, and 220V/25A voltage/current rating. The module is equipped with a peak observation circuit that can effectively protect the high-power thyristor, making it a longer life.
Usage
Series in the circuit of household appliances, (disconnect the household appliances WireFire or zero lines, and then connect the two lines of products) rotary potentiometer knob, you can play light and dark regulation, speed, pressure, thermostat effect.
Specification
- Working voltage: 220V AC
- Maximum power: 2000W
- Voltage regulation: 50V to 220V AC
Instructions
- charge/load should not exceed the maximum power of 2000W, otherwise, it will burn the module and electric appliances
- Use the resistive load as much as possible
- Reduce the capacitive and inductive load of much energy. It is best to leave half of them.
24C256 256 Kbit Serial I2C Bus EEPROM Memory IC
ESP-12F ESP8266 Serial WiFi Wireless Module
NodeMCU ESP8266 Expansion Base Board
Panel Mount 3 Pins SPDT Toggle Switch – 3A 250V
433MHz Wireless RF Tx Rx Transmitter Receiver Module Green
MFRC-522 RC522 Module RF Card Reader RFID Module for Arduino
HC05 Bluetooth Transceiver Module with TTL Output
ESP-12E ESP8266 Serial WiFi Transceiver Module
ESP8266 WiFi Wireless Transceiver Module ESP-01 for Arduino
ESP32 LoRa Wifi Bluetooth IoT Development Board 0.96 Inch OLED Display
SIM800L GPRS GSM Module with Wire Antenna
2.4GHz NRF24L01 Module with SMA Wireless Transceiver
STM32F103C8T6 Minimum System ARM Core STM32 Development Board 







There are no reviews yet.