This is a high power electric voltage regulator, work power up to 2000W and at 200V AC, usually can be used to adjust the voltage, light, motor speed, and temperature. In the case of access to the load, users can use it to adjust the AC voltage, adjust the range from AC50V to AC220V.
The device comes with reverse polarity protection and high current protection. It uses the Fr-4 circuit board that can bear high temperature, and 220V/25A voltage/current rating. The module is equipped with a peak observation circuit that can effectively protect the high-power thyristor, making it a longer life.
Usage
Series in the circuit of household appliances, (disconnect the household appliances WireFire or zero lines, and then connect the two lines of products) rotary potentiometer knob, you can play light and dark regulation, speed, pressure, thermostat effect.
Specification
- Working voltage: 220V AC
- Maximum power: 2000W
- Voltage regulation: 50V to 220V AC
Instructions
- charge/load should not exceed the maximum power of 2000W, otherwise, it will burn the module and electric appliances
- Use the resistive load as much as possible
- Reduce the capacitive and inductive load of much energy. It is best to leave half of them.
MAX7219 8 x 32 LED Dot 4 in 1 Display Matrix Module
74151 IC 8 Input Multiplexer IC
74540 8-bit Octal 3-State Inverting Buffer IC
15Pcs 3mm Diffused Red Light Emitting Diode LED
7408 IC Quad 2 Input AND Gate IC
7n60 7.4A 600V Power N-channel MOSFET
24C16 16 Kbit Serial I2C Bus EEPROM Memory IC
8 Channel 5V Relay Module with Opto Coupler
ESP-01 ESP8266 Adapter Programmer for Arduino
0.66 inc Mini I2C IIC OLED Display Module SSD1306 Shield
WS2812B Programmable/Addressable RGB LED Module
TPA3110 2x15W Stereo Digital Audio Amplifier Module
8×8 Dot LED Matrix Display LED Display Module
4-Channel 5V Relay Module for Arduino with Optocoupler
1.3 inch I2C IIC 128×64 OLED Display Module
1-Channel 12V Relay Switch Module 






There are no reviews yet.