-
×
WS2812B Programmable/Addressable RGB LED Module
1 × ₹35.00 -
×
5pc 1N4746 1W 18V Zener Diode
1 × ₹17.00
Subtotal: ₹52.00
Sensors and Modules
Soil Moisture Sensor Module Soil Hydrometer Humidity Detector
Product specifications
- Product type: soil moisture sensor
- PCB Dimension: 3mm x 15mm
- Soil probe size: 6mm x 30mm
- Cable size: 2.1mm
- Weight: aprx 10g
- Colour: as shown in image
- Package contains: 1 x Soil moisture sensor with 1 x soil probe and 1 x cable or wire
₹79.00 (ex. GST)
The soil moisture sensor is a device to measure volumetric water content in the soil. The sensor measures volumetric water content indirectly, without removing moisture, by using other parameters of soil like electrical resistance or conductance, dielectric constant and interaction with other neutrons. The result may vary depending on environmental factors like soil type, temperature, and conductivity, so it must be calibrated.
Specification
- Voltage supply: 3.3-5V
- Output mode: dual-mode, Analog (more accurate) and digital
- Comparator IC: LM393
- Indicator type:
- Red: power indicator
- Digital switching output indicator
Pin Description
- Vcc
- GND
- DO: Digital output
- AO: Analog output
Application
- Agriculture
- Gardening
- Landscape irrigation
Based on 0 reviews
Be the first to review “Soil Moisture Sensor Module Soil Hydrometer Humidity Detector”
Related products
-
-
-
Arduino
Arduino Uno Prototyping Shield with 170 Point Mini Breadboard
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The board is designed to solder both through-hole and SMD components to test them with your Arduino board. Although the SMD area is designed for 24 Pins SOIC integrated circuit and has a lot of space for TH components.
Features
- It has a standard 0.1” x 0.1” prototyping grid with big pads
- Comes with both stacking and plain header, choose whichever you want while soldering together
- An IC pattern for adding a DIP IC up to 20 pins
- Power rails down the middle and side
- A reset button and an extra use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of the shield on top, and/or use and AVR programmer
- A surface-mount chip area for up to 14 SOIC size part
- Compatible with tiny breadboards
- Every pin is brought out
- Gold plated pads
- 2 x 0.1uF ceramic capacitors on either side for extra power stability
SKU: BDA-002 -
There are no reviews yet.