3s 40A 18650 11.1V 12.6V Li-Ions Battery BMS Board with Balance
Product Details
- Charging voltage: 25.5V
- Charging current: 40A (max)
- Overcharge detection voltage: 25±0.025V
- Overcharge protection delay: 0.1S
- Over discharge detection voltage: 2.50±0.08V
- Over discharge detection delay: 0.1S
- Working current: 20A
- Temperature range: -40 – 85 ℃
- Compatible With: 11.1V-12.6V lithium battery
- Number of cells in Series: 3S
₹299.00 (ex. GST)
3S 40A 18650 11.1V 12.6V Li-ion Battery BMS Board (With Balance) is an electronic system that manages a rechargeable battery by monitoring its state, calculating the data, reporting that data. It gives overcharge Protection, short circuit protection, and over-discharge protection to the battery. The term 3S 40A 11.1V-12.6V BMS denotes 3 series, 11.1V-12.6V battery pack with 40A continues discharging current. It comes with a recovery function-AUTO Recovery. This balance version is suitable for starting current below 80A, power 135W below the drill (With balance). For a rechargeable battery pack, BMS is a must-needed device for safe operation.
Product Details
- Charging voltage: 25.5V
- Charging current: 40A (max)
- Overcharge detection voltage: 25±0.025V
- Overcharge protection delay: 0.1S
- Over discharge detection voltage: 2.50±0.08V
- Over discharge detection delay: 0.1S
- Working current: 20A
- Temperature range: -40 – 85 ℃
- Compatible With: 11.1V-12.6V lithium battery
- Number of cells in Series: 3S
Based on 0 reviews
Be the first to review “3s 40A 18650 11.1V 12.6V Li-Ions Battery BMS Board with Balance”
Related products
-
Modules
TM1637 4-Digit 7 Segment LED Display Module for Clock
Product Details:
- Product: 4 digit 7 segment display module
- Driver IC: TM1637
- Digits: – Four
- Surface Colour: – Black
- Epoxy Colour: – Milky White
- PCB color: Blue
- Dimensions :42mm x 24mm x 12mm
- Digit Height: – 14.2mm
- LED colour: green or red (depends on availability)
- Package contains: 1 x 4 digit 7 segment LED display module for Arduino
SKU: 212 -
Arduino and Accessories, Relays
1-Channel 5V Relay Module for Arduino
Product Specifications
- Product Type: 1-Channel relay module
- Dimensions: 75 mm x 55 mm x 19.3 mm
- Relay colour: Blue
- PCB colour: Blue
- Maximum output of relay: AC250V 10A and Dc30V 10A
- Number of Relays: 1
- Control signal type: TTL level
- Input voltage: 5v
- Compatible with: Arduino, AVR, PIC, ARM, Raspberry Pi etc
- Package contains: 1 piece of 1 channel relay module
SKU: 722 -
Arduino
Arduino Uno Prototyping Shield with 170 Point Mini Breadboard
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The board is designed to solder both through-hole and SMD components to test them with your Arduino board. Although the SMD area is designed for 24 Pins SOIC integrated circuit and has a lot of space for TH components.
Features
- It has a standard 0.1” x 0.1” prototyping grid with big pads
- Comes with both stacking and plain header, choose whichever you want while soldering together
- An IC pattern for adding a DIP IC up to 20 pins
- Power rails down the middle and side
- A reset button and an extra use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of the shield on top, and/or use and AVR programmer
- A surface-mount chip area for up to 14 SOIC size part
- Compatible with tiny breadboards
- Every pin is brought out
- Gold plated pads
- 2 x 0.1uF ceramic capacitors on either side for extra power stability
SKU: BDA-002 -
There are no reviews yet.